HISUN Rocker Switch
for the Turn Signal Left-Right function
This can be used 2015 - 2023 Models
(normally Bench Seat UTVs)
450, 500, 550, 700, 750, V-Twin 800, 1000
Comes with Metal U-Bracket and Rubber Bushing.
U-JOINT with (4) Outer Circlips
This U-Joint Bearing Cap is 22mm in Diameter and 58mm End to End.
Please Measure the Diameter before Buying.
If you need the 22mm Joint that has Clips on the Inside of each Yoke Finger, part # 26415-010-0000
or use this link; https://motorcycledoctor.com/product/22mm-u-joint-cross/
Complete U-Joint Assy. and both Yokes with 22mm Bearing End Caps. Fits from Front Diff to Driveshaft with 24mm ish Splines.The older Models have 20mm O.D. Front Drive Shaft Splines, this is for the 24mm Splined Drive Shaft.Contact us if any other Yokes are needed.
Complete U-Joint Assy. and both Yokes with 20mm Bearing End Caps. Fits from Front Diff to Driveshaft with 20mm Splines.The newer Models have 25mm O.D. Front Drive Shaft Splines, this is for the 20mm Splined Drive Shaft.Contact us if any other Yokes are needed.
This U-Joint or Cross Shaft Fork has 25mm O.D. End Bearing Caps and is 64mm Wide.
This the the U Joint Cross with (4) 22mm Bearing Caps, Complete with (4) Clips that mount Outside each Yoke Finger.If you need the 22mm Joint that has Clips on the Inside of each Yoke Finger, part # 26415-010-0000or use this link; https://motorcycledoctor.com/product/22mm-u-joint-cross/
All Yokes now have 22mm Bearings, early had 20mm, it is the Yoke Splines that matter.Complete U-Joint Assy with 22mm Bearing End Caps and Yokes (A and B), See Chart Picture.
Complete U-Joint Assy. with 22mm Bearing End Caps and Yokes (A and B) to fits updated 24ish mm Drive Shaft Spline. This connects the Engine Out Pinion to the Drive Shaft.
High-Output UTV 500 - 700 Stator and Regulator KIT.
Includes; Stator (Generator), Regulator,
Battery Harness, and install Directions .
This Stator is the Standard O.D. of 4.5" and now
has the flat plug to fit the 1000cc Regulator !
Shortest wire distance, Less plugs, Thicker wiring.
If you need a new Stator or want more Wattage this kit
is the Best answer and Updates your system !
FITS BOTH CARB AND EFI MODELS
Some call this the Magneto
- This is the Main Harness for the UTV 250 Utility (Bench Seat), not the Sport Model (Bucket Seat).
