HISUN REPLACEMENT
Battery Box Winged M6 Bolt and Flange Nut
This Kit Has (4) M6 Bolts and (4) M6 Nutss , as shown.
WILL FIT Bucket Seat UTV 500, 700, 750
HiSUN, MASSIMO, AXIS, BENNCHE, BIG MUDDY,TSC
CUB CADET, COLEMAN, MENARDS YARDSPORT & Many More
- Out of stock
This is for the HS400-450-500 Vector UTV that has the Front Vertical Frame Rails of 46 1/2" (Center to Center) wide.Early 400 Models had 47 1/2" and this newer model Vector 400-450-500 Windshield is 1" narrower.This has 6 Quick Release Clamps. If you need more Air Flow remove the bottom 1/3 section or just the upper.This is a Tight and Clear Polycarbonate not like the early model that was made from the cheaper Plexiglass. 
This is the Complete Mounting Kit for the Push-Out Style Windshield.
To add or replace, use a Press to remove the spring loaded Circlip on the Spring side end of the Clutch.
Then the 4 Ramps with the Allen Head bolts need to be removed.
This spacer is normally for the ODES 800 that has a Solid Center Roller on the Primary.
This spacer allows the Secondary Clutch Plates to Open which also allows the CVT Belt to drop down and release pressure off the Solid Center Roller of the Primary Clutch.
Remember, the Belt should NOT turn at Idle ! (900-1,100 rpm)
This is for the Wide Axle Model that is Approx. 60-62" Wide as the Std. Model is 52-54" Wide
Outside to Outside of either Wheel/Tire.
These Axles are 4" wider than Std. and measure approx. 30" and 29 1/4" when compressed.
The Wide Model has Double Curved Fender Flares.
This is the Upgraded O'Ring Sealed Chain that out last the Oringinal 5 xs Longer !The 250 Sport Model (2-Bucket Seat) normally has 72 Links.The 250 Utility Model (Bench Seat) normally has 76 Links.Please Count the Links in your Chain, each Pin = 1 link.-
This is the Upgraded O'Ring Sealed Chain that out last the Oringinal 5 xs Longer !The 250 Sport Model (2-Bucket Seat) normally has 72 Links.The 250 Utility Model (Bench Seat) normally has 76 Links.Please Count the Links in your Chain, each Pin = 1 link. 
Fits Front and Rear
This Throttle Cable is for the Raider and Ravager UTV 800 and 1000. Please Measure your old cable and check the Ends to match. Overall Length is Approx. 72" and the outer cable sheathing/housing is approx. 67".
Fit the HiSun Bench Seat Models with Doors 2015-2024 UTV 500-750. Also Includes the Cowboy and Knight models.Please view the 2 small cutouts for the Hood Pattern and Measures 51" Wide at Center of vertical Frame Rails.Comes with 6 Quick Release Clamps.
This is the Odes Fuel Injector # 25377440 that is for the 800 & 1000 Engines, sold each.
This Disc is for the Front of the Early Model Odes 800 and has a O.D. of just under 8"This also fits the HiSun early models with 12" Rims/Wheels, just looks different in the center by the hub and is a stronger design that the HiSun.