Normally for 2018ish and up HiSun 450-750 engines.Older Models have 15 tooth.
*This is for the ONE WAY BEARING ONLY*
The accompany Starter Disk Gear part number is 31240-004-0000
Starter Solenoid Relay
Fits Most HiSun UTV 800
Now Has White Plug End that is Different than the Older Grey Plug End.
HiSUN, MASSIMO, COLEMAN,Q LINK,BIG MUDDY,
SUPERMACH and Many More !
This is the Factory Starter Relay with Rubber Mount and Spare Fuse.
*This is for the DISC GEAR ONLY 69 Teeth*
We recommend the Mated ONE WAY BEARING part number is 31250-004-0000 (same)
This Larger Disc is now on most 2018 - current models. Please Measure/Count the size to compare with the Pictures. If you need the Smaller 1:5 Disc 67 Teeth, please order 31240-004-0000
This 800 Starter has been Updated to the 1000 Starter, 20% more Power !
HiSun UTV 250 Stator assy.
It is the Generator and Trigger.
Some call this the Magneto
250 STATOR & TRIGGER
Has 1 Flat 3-Wire Plug and White Oval 2-Wire Plug
O.D. = 88.5 mm, I.D. = 29mm, Has 18 Pole Fingers
Bolt Hole Centers are 40mm apart.
HiSun UTV Stator assy. 2015 & UP
Approx. 4 1/2" Diameter (Not 5")
It is the Generator and Trigger.
Some call this the Magneto
Fits New Flat 3-Wire and Long 2-Wire Black Plug from HiSun
500, 550, 700, 750 UTV'S
Please Check Both New Connectors
4.5'' STATOR WITH FLAT BLACK 3-WIRE PLUG AND BLACK 2-WIRE PLUG FOR THE TRIGGER
This fit most 500 and 700 models from 2008-2015 ish.
4.5'' (114.5mm O.D.) STATOR WITH YELLOW ROUND AND SQUARE WHITE PLUG FOR THE TRIGGER and Has a 55mm I.D.
HiSun UTV Stator assy. 2017ish & UP
Approx. 5" Diameter (Not 4.5")
It is the Generator and Trigger.
Some call this the Magneto
Has Long 38" Wire from Rubber Seal
500, 550, 700 & 750 UTV'S
This is the updated (only available) Stator Cover that now has a Dip Stick to make Checking Oil Level much easier !Approx. 2018ish and Newer 250s have this standard.If you have Early model 2015-2018ish, you will need the Dip Stick Kit also.Add this to your Cart; https://motorcycledoctor.com/product/dip-stick-tube-upg/
Fits both HiSun 800 and 1000 V-Twin Engines.
GENERATOR / STATOR COVER GASKET
HiSUN 450,500,550,700,750 UTV'S INCLUDING, MASSIMO, SUPERMACH,
Bennche, Cub Cadet, Q Link, COLEMAN, MENARDS YARDSPORT and More!
UTV & ATV 450 - 750 cc
All Carburetor and EFI Engines
Fits Most HiSun UT/UTV 400. 21" Long. Includes (2) Hardened M8 Bolts.Vector HS 400 uses 62700-115S-0000
Approx. 37 1/2'' Long has Common Splines of 15mm. Fits Bench Seat 500-550-700-750 2015-Current (not Vector model)
Approx. 24'' Long has Common Splines of 15mm, both Ends are the same. Comes with (2) M8 Bolts
